Operator`s manual

A-Class 137
Menu Constraint Cross-Reference
The table below highlights the menu item differences between the PE and the A-Class model printers.
PE Menu Item A-Class Menu Item Equivalent
Print Method
Media Type (see Section 4.2.2)
Select TOF
Sensor Type (see Section 4.2.2)
Darkness
Custom Adjustments – Darkness (see Section 4.2.3)
Start of Print
Custom Adjustments – Row Adjust (see Section 4.2.3)
Column Adjust
Custom Adjustments – Column Adjust (see Section 4.2.3)
PE Applicator Hardware
GPIO Device – Applicator and Start of Print (see Section 4.2.4)
Advanced Setup
N/A
PE Options –
PE Output Signal
GPIO Device – End of Print (see Section 4.2.4)
PE Options –
Backfeed Cntrl
Back After Print (see Section 4.2.5)
PE Options –
Ribbon Low
GPIO Device – Ribbon Low (see Section 4.2.4)
PE Options –
Exact Time Print
Imaging Mode (see Section 4.2.5)
PE Options –
AUX Port GPIO
N/A. The Aux Port is now an RS-232 interface. See
Communications – Serial Port B (see Section 4.2.6).
Ribbon Low Dia.
Ribbon Low Diameter (see Section 4.2.2)
Printer Model
Head Bias (see Section 4.2.5)
Counters
Media Counters (see Section 4.2.5)
Time/Date
Time and Date (see Section 4.2.5)
Label Options –
Heat Setting
Heat (see Section 4.2.3)
Label Options –
Print Speed
Print Speed (see Section 4.2.3)
Label Options –
Backfeed Speed
Reverse Speed (see Section 4.2.3)
Label Options –
Label Width
Label Width (see Section 4.2.2)
Label Options –
Label Length
Label Length (see Section 4.2.2)
Label Options –
Peel Position
Present Distance (see Section 4.2.3)
Label Options –
Rotate Label
Label Rotation (see Section 4.2.5)
System Options –
Factory Settings
Set Factory Defaults (see Section 4.2.5)
System Options –
Security Check
Security (see Section 4.2.5)
System Options –
Modify Password
Modify Password (see Section 4.2.5)
System Options –
Internal Module
Internal Module (see Section 4.2.5)
System Options –
Scaleable Font
Scaleable Font Cache (see Section 4.2.5)
System Options –
Symbol Set
Single Byte Symbols (see Section 4.2.5)
Compatibility –
Offset Bias
SOP Emulation (see Section 4.2.5)
Compatibility –
Positioning
DPL Emulation (see Section 4.2.5)