Operator`s manual

158 A-Class
To save a manually entered setup (for example, an application that requires a special media calibration)
as a configuration file via the User Interface, proceed as follows:
Step Displayed Message Action Comment(s)
1
READY
Press the
MENU
Key.
You are entering ‘Menu Mode’.
2
MEDIA SETTING
Use the
Key to scroll to
‘System Settings’.
The Key can also be used.
3
SYSTEM SETTINGS
Press the
ENTER
Key to select
‘System Settings’.
You are entering the ‘System
Settings’ menu.
4
SYSTEM SETTINGS
Use the
Key to scroll to
‘Configuration File’.
The Key can also be used.
5
CONFIGURATION FILE
Press the
ENTER
Key to select
‘Configuration File’.
You are entering the
‘Configuration File’ submenu.
6
RESTORE AS
CURRENT
Press the
Key to scroll to
‘Save Setting As’.
The
Key can also be used.
7
SAVE SETTING AS
Press the
ENTER
Key.
Press the
ESC
Key to exit this
selection.
Enter a file name using the
Key to scroll through the
characters.
The Key can also be used.
8
:
 Note: To change an accepted character, select the delete function (solid
flashing block) and press the ENTER Key.
Use the
ENTER
Key to accept the
character.
Continue entering the file name in
this manner (“SPECIAL MEDIA”
has been used as an example).
9
SPECIAL MEDIA:
!!
 Note: To abort the “save setting” function, delete all entered characters in
the file name and press the ESCAPE Key.
10
SUCCESSFUL
!!
Press the
ESC
Key repeatedly to
save the file name and return to
‘Ready’.
Save complete. (To restore a
saved file using the User Interface;
see Section 4.2.5.)