Operator`s manual

4 A-Class
 DMXrfNet – a high-performance 802.11b, WiFi compatible, network interface card that enables the
printer to communicate in a wireless network environment. Some of the features are listed below:
− TCP/IP (lpd or raw TCP port), Direct Mode IPX/IP, IPX/SPX, NetBEUI, and NetBIOS/IP
support
− A PCMCIA connector for other supported 802.11b wireless devices
− Frequency in the 2.4 GHz ISM band, with variable data rates of 11, 5.5, 2, and 1 Mbps
− Selectable Wired Equivalent Privacy
− Sensitivity of -91dBm at 1Mbps, -88dBm at 2Mbps, -87dBm at 5.5 Mbps, and - 84dBm at 11
Mbps; Range of 100m indoors and 300m outdoors
− Industry standard MMCX diversity antenna connectors
− Hot swappable 10baseT Ethernet port for wired connections
− RS-232 compatible serial port with selectable baud rates to 230.4Kbps.
− Datamax Web XAdmin web-browser facility including English, German, French, and Dutch
multilingual capability
− Datamax XAdmin NetWare/VINES/TCP/IP Windows-based utility
− Console accessible via serial port, TELNET or NetWare
− NetWare PCONSOLE, PRINTCON, PRINTDEF, NWADMIN; automatic detection of NetWare
frame type, or frame type can be forced
− Simple Network Management Protocol MIB I and II; IP or IPX
− Multiple server firmware downloads via NetWare or TCP/IP (master mode tftp, slave mode
TFTP, or BOOTP)
− On-line Help guide; Diagnostics including protocol trace capability and crash dump
− Multiple services per port
− lpd-Plus virtual printer capability for complex user-defined setup and reset strings configurable
on a per-service basis
− Programmable character string conversion
− IP security allows access restriction to the Card based on IP addresses; IP address configuration
via serial port, arp, rarp, DHCP, BOOTP, Xadmin & WP-Admin utility, JetAdmin/Web
JetAdmin, and NetWare; configurable TCP port numbers on a per-service basis