Operator`s manual

20 A-Class
3.3.1.1 USB Connections
The Universal Serial Bus port, supported in Windows
®
95 and greater, requires a standard USB cable.
(Depending upon your computer’s configuration, installation may differ slightly.)
WARNING
This USB Port is a device-end only connection. Never attach a keyboard, mouse, modem, etc. to
this port. Damage can result.
3.3.1.2 Parallel Port Connections
The parallel interface requires a Centronics
®
IEEE 1284 cable with a 36 pin male connector. Bi-
directional mode is IEEE 1284 Compliant, using forward and reverse channel communications. In this
mode, data can be sent to the host provided it is also IEEE 1284 Compliant and has supporting software.