Operator`s manual

50 A-Class
Print Control (continued)
Displayed Menu Item Details
CUSTOM ADJUSTMENTS ♦
These factory adjustments independently change the listed
parameters to finely tune the printer and compensate for slight
mechanical differences sometimes evident if multiple printers share
label formats.
DARKNESS
32 (1-64)
Controls the strobe time to establish the nominal HEAT setting for
printhead-specific thermal characteristics.
CONTRAST
32 (1-64)
Allows fine-tuning of the relative print edge (gray) adjustment for
print quality.
ROW ADJUST
000 DOTS
Shifts the vertical start of print position in dots upward or
downward to fine-tune the ROW OFFSET setting; see Appendix C.
COLUMN ADJUST
000 DOTS (0-128)
Shifts both the horizontal start of print position and the LABEL
WIDTH termination point to the right in dots to fine-tune the
COLUMN OFFSET setting; see Appendix C.
PRESENT ADJUST
064 DOTS (0-128)
Adjusts the label stopping position in dots to fine-tune the
PRESENT DISTANCE setting; see Appendix C.
4.2.4 Printer Options
Displayed Menu Item Details
MODULES Memory available for user storage of graphics, fonts and label
formats. (The physical presence of the respective memory module
must be detected to show the function selections in the menu
system. See Appendix C for a listing of all possible modules.)
PRINT DIRECTORY
Prints a label directory of selected, or of all available modules, the
available space on these modules, the files present, and the type of
module and files.
PRINT FILE
Selects from a list of available stored files for printing.
FORMAT MODULE
Selects from a list of available modules for formatting. Note that all
existing module data will be erased.
DELETE FILE
Selects from a list of available files for deleting. (Protected modules
will not appear, and bytes will not be retrieved until the module
containing the deleted file is packed.)
PACK MODULE
Removes files marked as deleted, and defragments existing file
structures to recover space.