Operator`s manual

A-Class 65
Communications (continued)
Displayed Menu Item Details
HEAT COMMAND
Allows the user to disable the DPL Heat Command, providing
compatibility with other DATAMAX printers.
ENABLED
Normal printer operating mode.
DISABLED
DPL Heat command is ignored. The heat value is controlled via the
menu setting; see Section 4.2.3.
SPEED COMMANDS
Allows the user to disable the DPL speed commands (Print, Feed,
Slew, and Reverse).
ENABLED
Normal printer operating mode.
DISABLED
DPL speed commands are ignored. The speeds are controlled via
the menu setting; see Section 4.2.3.
TOF SENSING COMMANDS
Allows the user to disable the DPL Top of Form commands (Gap,
Continuous, and Reflective).
ENABLED
Normal printer operating mode.
DISABLED
DPL TOF commands are ignored. The TOF is controlled via the
menu setting; see Section 4.2.2.
SYMBOL SET COMMAND
Allows the user to disable the DPL Single and Double Symbol Set
selection commands.
ENABLED
Normal printer operating mode.
DISABLED
DPL Symbol Set commands are ignored. The Symbol Set selection
is controlled via the menu setting; see Section 4.2.5.
CNTRL-CODES (DATA)
Allows the user to remove control codes (data < 20 Hex) from the
data fields. The selected line terminator is processed.
ENABLED
Normal printer operating mode.
DISABLED
DPL Control Code (SOH, STX, CR, ESC, and ^) functions are
ignored.
STX-V SW SETTINGS
Allows the user to disable the DPL software switch setting
commands.
ENABLED
Normal printer operating mode.
DISABLED
DPL option-enable command (<STX>V) is ignored.
MAX LENGTH COMMAND
Allows the user to disable the DPL maximum label length
command.
ENABLED
Normal printer operating mode.
DISABLED
The DPL <STX>M command is ignored. Maximum label length is
controlled via the menu setting; see Section 4.2.2.