Operator`s manual

70 A-Class
4.4 Test Mode
The internally generated Test Labels are printed at pre-selected speed and heat settings. Changes to these
label settings can be made from the Menu System or via software commands.
 Notes:
(1) Except as noted, use full width media to capture the entire format; otherwise, adjust the Label Width (Section
4.2.2) and Leveling Cam settings (Section 5.2.1) to the media’s width.
(2) In Test Mode, press the ESC Key or the TEST Key to stop printing.
(3) A printing time delay can be set (see Print Test Rate, Section 4.2.7).
4.4.1 Print Quality Label
The Print Quality Label is a general indicator of overall print quality. The format, consisting of compliant
fence and ladder bar codes, assorted sizes of fonts, and graphic fill patterns, can be used to ensure
conformance, as well as aesthetics. Generate a Print Quality Label as follows:
1. Press the
TEST
Key.
3. Press the
Key to scroll to ‘Print Quality Label.’
4. Press the
COUNT
Key to select a quantity; see Section 4.1.3.
5. Press the
ENTER
Key to begin printing.