Operator`s manual

A-Class 73
4.4.4 Validation Label
The Validation Label is another useful tool for establishing print quality. Generate a Validation Label as
follows:
1. Press the
TEST
Key.
2. Press the
Key to scroll to ‘Validation Label.’
3. Press the
COUNT
Key to select a quantity; see Section 4.1.3.
4. Press the
ENTER
Key to begin printing.
4.4.5 Print Last Label
Print Last Label reprints the last label format printed. The format can be any of the Test Labels, a label
from the host, or one recalled from memory.
 Note: If a job was cancelled prior to its completion, or if power has been removed since the last print job and
the request for this label, this selection will print a ‘VOID’ message.