Operator`s manual

20 I-Class
4.1.2 Ready Mode: Normal Operation (Ready Light ON)

The PAUSE Key temporarily suspends printing, and pressing it
again returns normal operation.

The FEED Key advances labels, and clears any corrected
faults. Pressing and holding it initiates calibration; see Section
3.5.

The CANCEL Key cancels the current print job and then pauses the printer. Pressing and
holding it four seconds initiates a soft reset; see Section 5.3.1.

The MENU Key toggles the Ready and Menu Modes (and while in Ready Mode, pressing and
holding it adjusts the LCD Contrast.)

The TEST Key enters and exits the Test Mode.
4.1.3 Menu Mode: Configuration (Ready Light “Flashing”)

The DOWN ARROW Key scrolls to a previous menu item, and
also decrements numerical values for most menu selections.

The UP ARROW Key scrolls to the next menu item, and also
increments numerical values in most menu selections.

The ENTER Key selects the function, item, or displayed value; also moves between
selections within multiple parameter fields.