Operator`s manual

34 I-Class
Printer Options (continued)
Menu Item Details
RETRY ATTEMPTS Sets the number of retry attempts, where:
3 (0 - 9)
Is the retry count before a fault is declared.
AUTO DETECT TAG
Allows the printer to establish the tag to transducer
distance setting. CALIBRATING RFID will appear as
media is scanned for the tag location. Upon completion,
the media will be retracted to the TOF position with the
positioning results (along with a brief SUCCESS or
FAILURE message).
SET DEFAULTS Allows the RFID default values to be restored, where:
YES Restores the default settings.
NO
Exits the menu item without changing the current
settings.
GPIO PORT Controls the GPIO operation, where:
GPIO DEVICE
Sets the GPIO option to work with a specific device
type, where:
APPLICATOR Enables parameters for related label applicator
functions:
• Completion upon last SOP, de-asserts Data Ready
(DRDY);
• FEED allowed at any time; and,
• DRDY upon PAUSE.
APPLICATOR2
Enables parameters for alternate label applicator
functions:
• Completion upon 1 msec. overlap of Data Ready
(DRDY) and End of Print (EOP);
• DRDY signal end inhibits FEED; and,
• De-asserts DRDY upon PAUSE or FAULT.
BARCODE VERIFIER Enables the GPIO Port to work with a bar code verifier.
DISABLED Disables the option.