Specifications

MP Series: Compact4 Mark II & Compact4 Mobile Mark II
15
The Compact4 Mark II printers have several options available to help meet your specific requirements and enhance
your printing experience. Refer to the subsequent pages for availability and compatibility.
Tower Kit
Unlike any other printer in the industry, the Compact4 Mark II printers can be stacked using the
tower rack accessory. The rack is designed to maintain the footprint occupied by a single printer
while allowing easy loading and printing operations.
Wall Mounting Kit
The wall mounting kit allows the printer to be wall mounted quickly and easily. It is ideal in
applications where counter space is limited and the printer is in close proximity.
Label Taken Sensor Kit
The label taken sensor, also know as LTS, is commonly used with the peeler kit. A photo cell is
mounted facing upward at the label exit to detect when the label is taken. The photo cell controls
the printing pace so that the next label is printed only after the previous label has been removed.
Peeler Kit
The peeler kit automatically separates the label from the label liner (backing) by pulling the liner
over a sharp edge and winding it onto a three pronged spindle. This allows the user to take a
printed label directly from the printer and apply it. A peeler kit along with a label taken sensor
kit automates applying labels by removing the label liner and pausing printing until the label is
taken.
Large Roll Kit
The large roll kit allows the printer to handle a larger roll loaded onto its spindle which increases
the roll diameter capacity from 3.9”( 100mm) to 5.9” (150mm). The kit requires removing the
old spindle and installing a new spindle that displaces the roll further from the printer.
Options/Accessories