Datasheet

DRH860
DDR2-667, PC2-5300, Registered, ECC, 1.8V, 240-pin DIMMs
DRH860 06-Jun-09
Products in Family
DRH860/4GB (2 x 2GB 2R DIMMs)
DRH860/8GB (2 x 4GB 2R DIMMs)
Features Description
240-pin JEDEC-compliant DIMMs
133.35 mm wide by 30 mm high (1.20” x 5.25”)
Data Transfer Rate: 5.3 Gigabytes/sec
Operating Voltage: 1.8 V ±0.1
Error Checking and Correction (ECC) bits
Supports Intel SDDC and Chipkill Advanced ECC Features
Fully RoHS Compliant
Each DRH860 upgrade consists of a matched set of two
DDR2-667
1)
Registered DIMMs with address/command
parity functionality. One 2K-bit EEPROM is used for
Serial Presence Detect.
1)
DDR2-533 for the 8GB upgrade.
Dataram Product HP Product Supported in these HP systems:
DRH860/4GB
DRH860/8GB
AD344A
AD345A
Integrity BL860c
30.000
[1.181]
63.00
[2.480]
55.00
[2.165]
5.00
[0.197]
5.18
[0.204]
123.00
[4.842]
10.00
[0.394]
17.80
[0.701]
4.00
[0.157]
2.54 Min
[0.100 Min]
1.27 ±.10
[0.0500 ±0.0040]
3.94 Max
[0.155] Max
4.00 Min
[0.157] Min
133.350
[5.250]
Back view
Front view
Side view
Notes
Tolerances on all dimensions
except where otherwise
indicated are ±.13 (.005).
All dimensions are expressed
in millimeters [inches]
Copyright © 2009 Dataram Corporation | U.S.A. Headquarters [phone] | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.