Datasheet

DRH81333RL
DDR3-1333, PC3L-10600, Registered, ECC, 1.35V, 240-pin DIMMs
DRH81333RL 17-May-12
Copyright  2012 Dataram Corporation | U.S.A. Headquarters [phone] | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.
Products in Family
DRH81333RSL/4GB (1 x 4GB 1Rx4 DIMM)
DRH81333RL/8GB (1 x 8GB 2Rx4 DIMM)
DRH81333RL/16GB (1 x16GB 2Rx4 DIMM)
Features
Description
240-pin JEDEC-compliant DIMMs
133.35 mm wide by 30 mm high (1.181” x 5.25”)
Data Transfer Rate: 10.6 Gigabytes/sec
Operating Voltage: 1.35 V ±0.075 (1.5 V tolerant)
Fully RoHS Compliant
Thermal Sensor
Heat Spreader
HP SmartMemory compliant
Each DRH81333RL upgrade consists of a single DDR3-
1333 Registered DIMM that conforms to JEDEC’s DDR3,
PC3L-10600 standard. One 2K-bit EEPROM is used for
Serial Presence Detect and a combination register/PLL
with Address and Command Parity is also used. A
thermal sensor accurately monitors the DIMM module
and can prevent exceeding the maximum operating
temperature of 95C.
Dataram Product
HP Product
Supported in these HP systems:
DRH81333RSL/4GB
DRH81333RL/8GB
DRH81333RL/16GB
647893-B21
647897-B21
647901-B21
ProLiant BL460c G8, DL160 G8, DL360p G8, DL380p
G8, ML350p G8, SL230s G8, SL250s G8
Notes
Tolerances on all dimensions
except where otherwise
indicated are .13 (.005).
All dimensions are expressed
in millimeters [inches]