Datasheet

GRH667FB
DDR2-667, PC2-5300, Fully Buffered, ECC, 1.8V, 240-pin DIMMs
GRH667FB 24-Sep-10
Products in Family
GRH667FB/4GB (2 x 2GB 2R DIMMs)
GRH667FBL/4GB (2 x 2GB Low Power 2R DIMMs)
GRH667FB/8GB (2 x 4GB 2R DIMMs)
GRH667FBL/8GB (2 x 4GB Low Power 2R DIMMs)
GRH667FB/16GB (2 x 8GB 2R DIMMs)
GRH667FB/64GB (8 x 8GB 2R DIMMs)
Features Description
240-pin JEDEC-compliant DIMMs
133.35 mm wide by 30 mm high (1.20” x 5.25”)
Data Transfer Rate: 5.3 Gigabytes/sec
Operating Voltage: VDD = 1.8 V ±0.1; VCC = 1.5V ±0.1
Full DIMM Heat Spreader
Fully RoHS Compliant
Each GRH667FB upgrade consists of a matched set of
two (eight in the case of the 64GB Kit) DDR2-667 FB-
DIMMs. One Advanced Memory Buffer (AMB) is used as
the interface between the system memory bus and DIMM
DRAMs. One 2K-bit EEPROM is used for Serial
Presence Detect. For improved thermal performance, a
Full DIMM Heat Spreader with thermal interface material
(TIM) is attached to the front and back of the DIMM.
Dataram Product HP Product Supported in these HP systems:
GRH667FB/4GB
GRH667FBL/4GB
GRH667FB/8GB
GRH667FBL/8GB
GRH667FB/16GB
GRH667FB/64GB
397413-B21
461828-B21
397415-B21
466440-B21
413015-B21
495604-B21
HP ProLiant BL20p G4, BL460c, BL460c G5, BL480c,
BL680c G5, DL140 G3, DL160 G5, DL360 G5, DL380
G5, DL580 G5, ML350 G5, ML350 G5, ML370 G5
30.00
[1.181]
47.00
[1.850]
71.00
[2.795]
5.00
[0.197]
5.125
[0.204]
123.00
[4.843]
9.50
[0.374]
17.30
[0.681]
2.50
[0.098]
1.27 ±.10
[0.0500 ±0.0040]
7.493 Max
[0.295] Max
4.00 Min
[0.157] Min
133.35
[5.250]
Back view
Front view
Side view
w/heatspreader
Notes
Tolerances on all dimensions
except where otherwise
indicated are ±.13 (.005).
All dimensions are expressed
in millimeters [inches]
Copyright © 2010 Dataram Corporation | U.S.A. Headquarters +1 609-799-0071 | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.

Summary of content (1 pages)