Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 POTS in a BOX® CDS-9010 LTE VoIP Dual Band Wi-Fi Router User Manual V1.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 Table of Contents 1 2 3 4 Preface..........................................................................................................................................................................................................................................................................................................5 LED Indicators and Connectors ...........................................................................
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5 4.10.1 Calling phone or extension numbers ..................................................................................................................................................................................................................................30 4.10.2 Direct IP calls ...............................................................................................................................................
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 6 7 5.8.5 TR069 ................................................................................................................................................................................................................................................................................68 5.9 System Log ....................................................................................................................................
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 1 Preface Thank you for choosing CDS9010 wireless router with VoIP. This product will allow you to make ATA call using your broadband connection and provides Wi-Fi router function. This manual provides basic information on how to install and connect CDS9010 wireless router with VoIP to the Internet. It also includes features and functions of LTE connection, wireless router with VoIP components, and how to use it correctly.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 2 LED Indicators and Connectors Before you use the high-speed router, please get acquainted with the LED indicators and connectors first. 2.1 LED Indicators Front Panel LED Status Explanation On (GREEN) PWR BATTERY Phone 1/2 Wi-Fi WAN LAN 1/2 DCD Cell On Blinking (GREEN) The router is powered on (External Power) and running normally. The router is powered on (Internal Power - BAT) and running normally.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 Rear Panel Interface Description DC Connector for a power adapter. WAN Connector for accessing the Internet. LAN1/2 Connectors for local networked devices.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 2.2 Hardware Installation Before starting to configure the router, you have to connect your devices correctly. Step 1.Connect Line port to land line jack with a RJ-11 cable. Step 2.Connect the WAN port to a modem or switch or router or Internet with an Ethernet cable. Step 3.Connect one port of 2 LAN ports to your computer with a RJ-45 cable. This device allows you to connect 2 PCs directly. Step 4.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 3 Interactive Voice Response In any circumstance, pressing the following command to enter relevant function. The following table lists command, and description. Voice Menu Setting Options Operation code Contents Step 1.Pick up phone and press “****” to start IVR 1 Step 2.Choose “1”, and CDS9010 report the current WAN port connection type Step 3.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 6 7 8 9 0 Step 1.Pick up phone and press “****” to start IVR Step 2.Choose “6”, and CDS9010 report “Factory Reset” Step 3.Prompt "Please enter password", the method of inputting password is the same as operation 1. If you want to quit by the wayside, press “*”. Step 4.Prompt “operation successful” if password is right and then CDS9010 will be factory setting. Step 5.Press “7” reboot to make changes effective. Step 1.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 Notice: ◆ When using Voice Menu, press * (star) to return the main menu. ◆ If any changes made in the IP assignment mode, please reboot the CDS9010 to take the setting into effect. ◆ When enter IP address or subnet mask, use “*”(Star) to replace “.” (Dot). For example, to enter the IP address 192.168.20.159 by keypad, press these keys: 192*168*20*159, use the #(pound) key to indicate that you have finished entering the IP address.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 4 Configuring Basic Settings 4.1 Administrator Management This chapter explains how to setup a password for an administrator user and how to adjust settings for accessing Internet successfully. CDS9010 supports two-level management: administrator and user. For administrator mode operation, please type Username/Password and click Login button to configuration.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 4.2 Accessing Web Page 4.2.1 From LAN port 1. Make sure your PC have connected to the router’s LAN port correctly. Notice: You may either simply set up your computer to get IP dynamically from the router or set up the IP address of the computer to be the same subnet as the default IP address of router is 192.168.1.1. For the detailed information, please refer to the later section - Trouble shooting of the guide. 2.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 Notice: If you fail to access to the web configuration, please go to “Trouble Shooting” for detecting and solving your problem. 4. The web page can be logged out after 5 minutes without any operation.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 4.3 Webpage No. Name Description Click navigation bar, many sub-navigation bar will 1 Navigation bar appear in the place 2 Click 2 sub-navigation bar to choose one Title configuration page 3 Parameter To configuration the parameters ◆ Every time making some changes, user should press this button to confirm the changes. ◆ After pressing the button, the red will appear to notice rebooting. To cancel the changes.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 4.4 Setting up the Time Zone Open Administration/Management webpage as shown below, please select the Time Zone for the router installed and specify the NTP server and set the update interval in NTP synchronization. 4.5 Setting up the Internet/WAN Connection Open the Network/WAN webpage as shown below; please select the appropriate IP Mode according to the information from your ISP.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 have a public subnet, you could assign an IP address to the WAN interface.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 4.5.2 DHCP It is not necessary for you to type any IP address manually. Simply choose this type and the system will obtain the IP address automatically from DHCP server.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 WAN IP The mode for obtain IP address Mode LAN Connection Select to NAT or Bridge Mode Set the DNS Mode from Auto and Manual, If user choose manual, you should fill the primary DNS DNS Mode address and Secondary DNS address into Primary DNS Address and Secondary DNS Address.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 4.6 Setting up the Internet/LTE Connection 4.6.1 LTE LTE Modem Select to Disable, Auto Connect and Enable Always Connect.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 When LTE connected successfully, return the Status page, you can check the link status and the IP address obtained from the ISP. is a sample screenshot and certain fields will populate differently based on device model and included radio version.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 4.7 Setting up the Wireless Connection To set up the wireless connection, please skip the following steps. 4.7.1 Enable Wireless and Setting SSID Open 2.4G (5G) /Basic webpage as shown below Radio On/Off Select to enable or disable wireless. Wireless Select to AP or Client. WiFi Client Connection would be option for Active WAN. Mode Choose one network mode from the Network Mode drop down list.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 point (AP) form a basic access device (BSS), each computer in the BSS must be configured with the same BSSID. Frequency Choose channel frequency. In HT (High Throughput) Physical HT Physical mode setting allow for control of the Mode 802.11n wireless environment. Mixed Mode: In this mode packets are transmitted with a preamble compatible with the legacy Operating 802.11a/g, the rest of the packet has a Mode new format.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 4.7.2 Encryption Open 2.4G (5G)/Security webpage to set the encryption of routers. WAP-PSK/WAP2-PSK/WAPPSKWAP2PSK Choose one SSID from Off-premises SSID Choice 1, off-premises 2 and Premises. Unless one of these encryption modes is selected, wireless transmissions to and from your Security Mode wireless network can be easily intercepted and interpreted by unauthorized users.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 OPENWEP card also need to correspond to this. Set the WEP key. Select 64-bit key to enter Hex is 10 characters, or ASCII WEP Keys code is 5characters; select 128-bit keys need to enter Hex is 26 characters, or ASCII is 13characters. Policy Select to Disable/Allow/Reject Add a station Use this section to add MAC MAC addresses to the list below.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 4.8 Setting up WAN Failover 4.8.1 WAN Failover List WAN Failover works in multiple outbound links to assure that you maintain Internet connectivity if a loss of connectivity occurs on one of your WAN connections. If one of your ISP links goes down, WAN Failover will automatically route all traffic over the other WAN(s) until service is restored. CDS9010 allows failover of the default route to WAN interfaces.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 4.8.2 Connection Manager Enable this function, WAN Failover is based on ping result. Disable this Enable function, WAN Failover is based on each interface physical status. Detect Interval time for detecting WAN Interval connection. Ping this WAN’s Ping the IP address of WAN’s gateway.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 4.9 Register 4.9.1 Get the Accounts CDS9010 has 2 RJ-11 phone port jacks, you can use it to make a SIP call, and before registering, you should get the SIP account from your administrator or provider. 4.9.2 Connections Connect CDS9010 to the Internet properly 4.9.3 Configuration SIP from Webpage Step 1.Open SIP Account/Line 1 webpage, as the picture in the right side. Step 2.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 4.9.4 View the Register Status To view the status, please open Status webpage and view the value of register status. The value is registered like the following picture which means CDS9010 have registered normally and you can make calls.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 4.10 Make Call 4.10.1 Calling phone or extension numbers To make a phone or extension number call: a) Both ATA and the other VoIP device (i.e., another ATA or other SIP products) have public IP addresses, or b) Both ATA and the other VoIP device (i.e., another ATA or other SIP products) are on the same LAN using private or public IP addresses, or c) Both ATA and the other VoIP device (i.e.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 4.10.3 Call Hold While in conversation, pressing the “*77” to put the remote end on hold, then you will hear the dial tone and the remote party will hear hold tone at the same time. Pressing the “*77” again to release the previously hold state and resume the bi-directional media. 4.10.4 Blind Transfer Assuming that call party A and party B are in conversation. A wants to Blind Transfer B to C: Step 1.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5 Web Configuration This chapter will guide users to execute full configuration through admin mode operation. 5.1 Login Step 1.Connect the LAN port of the router to your PC Step 2.Open a web browser on your PC and type in http://192.168.1.1. The window will ask for typing username and password.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.2 Status This webpage shows the status information about product information, Network and system. It shows the basic information of the product, such as product name, serial number, MAC address, hardware version and software version. It also shows the information of Link Status, WAN Port Status, and LAN Port Status. And it shows the current time and the running time of the product.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.3 Network You can configuration the WAN port, LAN port, DDNS, Multi WAN,DMZ, MAC Clone,Port Forward and so on in these two bars. 5.3.1 WAN This page allows you to set WAN configuration with different modes. Use the Connection Type drop down list to choose one WAN mode and then the corresponding page will be displayed.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 DHCP: It is not necessary for you to type any IP address manually. Simply choose this type and the system will obtain the IP address automatically from DHCP server.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 WAN IP The mode for obtain IP address Mode LAN Connection Select to NAT or Bridge Mode Set the DNS Mode from Auto and Manual, If user choose manual, you should fill the primary DNS DNS Mode address and Secondary DNS address into Primary DNS Address and Secondary DNS Address.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.3.2 LAN LAN Port: The most generic function of router is NAT. What NAT does is to translate the packets from public IP address to local IP address to forward the right packets to the right host and vice versa. Type in local IP address for connecting Local IP Address to a local private network Type in an address code that Local Subnet Mask determines the size of the network. Local DHCP Server If or not enable DHCP server.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.3.3 VPN/L2TP VPDN VPN Enable Enable PPTP or L2TP VPN Client Initial Service IP VPN server IP address User Name The account for authentication Password The password for authentication The remote virtual IP as default VPN As Default Route gateway . Stateless encryption provides a lower MPPE Stateful(PPTP level of performance, but will be more Only) reliable in a lossy network environment.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 L2TP Server L2TP Server Enable Select to enable L2TP server. Local IP Address Set the IP address of L2TP server. Set the IP pool start IP address which Pool Start Address will assign to the L2TP clients. Set the IP pool end IP address which Pool End Address will assign to the L2TP clients. Maximum Transmission Unit. It is the identifier of the maximum size of Max MTU packet, which is possible to transfer in a given environment.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 Encapsulated Mode Select the security protocols Enable NAT Traversal for IPSec. This NAT Enable item must be enabled when router under NAT environment. Select from “Main” and “aggressive” Mode for the IKE negotiation mode in phase 1. Select Encryption Algorithm to be Encryption Algorithm used in IKE negotiation. Select Integrity Algorithm to be used Integrity Algorithm in IKE negotiation.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.3.4 DMZ/Port Forward DMZ DMZ Enable If or not enable DMZ. Enter the private IP address of the DMZ Host IP Address DMZ host Get the current PC’s IP address Get Current PC IP automatically, this IP address would be used as DMZ host.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 Port Forward Port Forwarding Assign a meaningful name for port Comment forwarding. IP Address The IP address in LAN side The port range for LAN host, from 1 to Port Range 65535 Select from “TCP”, “UDP” or Protocol “TCP&UDP” Virtual Servers Assign a meaningful name to the Comment virtual server. The IP address of the system on your IP Address internal network that will provide the virtual service.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.3.5 DDNS Select the DDNS service which you Dynamic DNS Provider have established an account with. Enter account that DDNS server Account provided. Enter password that DDNS server Password provided. Enter the DDNS Domain name or IP DDNS URL address. Status Show current status of DDNS QoS Enable Select to enable QoS function Upstream Prescribe uplink speed of router. Downstream Prescribe downlink speed of router. 5.3.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 Source port range of the service that Src.Port Range you want to set it with QoS Control. Destination port number of the service Dst.Port Range that you want to set it with QoS Control. Physical Port Select from WAN/LAN set the Differentiated Services Code DSCP Point (DSCP) values in Quality of Service (QoS) 802.1p is an IEEE standard that describes mechanisms to prioritize 802.1p traffic and perform dynamic multicast filtering.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.3.7 MAC Clone Some ISPs will require you to register your MAC address. If you do not wish to re-register your MAC address, you can have the router clone the MAC address that is registered with your ISP. To use the Clone Address button, the computer viewing the Web-base utility screen will have the MAC address automatically entered in the Clone WAN MAC field.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.3.8 Routing The IP address of packets that will take Destination this route. Host/Net Select the Host or Networking Specifies the next hop to be taken if Gateway this route is used. Specifies the interface LAN/ Interface INTERNET/ VOICE/ TR069/ VPN Comment Set comment of this routing.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.4 Wireless 5.4.1 Basic Radio On/Off Select to enable or disable wireless. Wireless Select to AP or Client. WiFi Client Connection Mode would be option for Active WAN. Choose one network mode from the Network Mode drop down list. Multiple SSSD Set more wireless network. Broadcast(SSID) Broadcast or hide the SSID Prevents one wireless client AP Isolation communicating with another wireless client.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 Mixed Mode: In this mode packets are transmitted with a preamble compatible with the legacy 802.11a/g, the rest of the packet has a Operating Mode new format. Green Field: In this mode high throughput packets are transmitted without a legacy compatible part. Channel 20 Channel Width = 20 MHz Bandwidth 20/40 Channel Width = 20/40 MHz Extension Auto to choose extension channel Channel(5GHz frequency. Only) With IEEE 802.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.4.2 Security Open 2.4G (5G)/Security webpage to set the encryption of routers. Choose one SSID from Off-premises SSID Choice 1, off-premises 2 and Premises. Unless one of these encryption WAP-PSK/WAP2-PSK/WAPPSKWAP2PSK modes is selected, wireless transmissions to and from your Security Mode wireless network can be easily intercepted and interpreted by unauthorized users.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 card also need to correspond to this. OPENWEP Set the WEP key. Select 64-bit key to enter Hex is 10 characters, or ASCII WEP Keys code is 5characters; select 128-bit keys need to enter Hex is 26 characters, or ASCII is 13characters. Policy Select from Disable/Allow/Reject Add a station Use this section to add MAC MAC addresses to the list below.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.4.3 Station list You could monitor stations which associated to this AP here. 5.4.4 Client Enable WiFi Client would be one option for WAN Failover, select as the default route. Connection Status Current WiFi Client connect status Select one SSID and press the button, Connect enter the password for the SSID.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.4.5 VoIP QoS QoS services can improve the quality of voice applications. The default value is SIP QoS(0-63) 46, and the range of values can be set from 0 to 63. Once Multi-WAN port is enabled, select the corresponding voice PPPoE server RTP QoS(0-63) VID, the devices under the same VLAN can transmit voice data. 5.4.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.4.7 Blacklist You can upload or download the phone book, blacklist. 5.4.8 Call Log On this page, users can view replay lists (outgoing calls), received calls, and missed calls.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.5 SIP Account 5.5.1 FXS1/2 SIP Account Line Enable Select to enable or disable Line Outgoing Call without Select to enable or disable this function Registration Display Name The display name of this SIP number The phone number provided by SIP Phone Number server The account provided by SIP server for Account authentication The password provided by SIP server for Password authentication 5.5.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 Vocoder in 200OK SDP Codec Priority Select from local or remote Packet Cycle Follows Select to enable or disable Remote SDP FAX Mode Select from T.30/ T.38/ ByPass Bypass Attribute Value Select from fax/modem or X-fax/Xmodem T.38 CNG Detect Select to enable or disable Enable T.38 CED Detect Select to enable or disable Enable gpmd attribute Enable Select to enable or disable T.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.5.3 FXS1/2 Supplementary Service Subscription Call Waiting Hot Line Select to enable or disable Fill in the hotline number.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.6 Security 5.6.1 Filtering Setting Filtering Default Policy Interface Mac address Destination IP Address Select to enable or disable Select from Drop or Accept Select from LAN or WAN Fill MAC address for Filtering control Fill Destination IP address for Filtering control Source IP Address Protocol Dest.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.6.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.7 Application 5.7.1 Advance Nat In this page, you can choose to enable / disable FTP, SIP, H323, PPTP, L2TP, IPSec services.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.7.2 UPnP UPnP (Universal Plug and Play) supports null-setting for networking, can automatically find a variety of networked devices. When UPnP is enabled, UPnPenabled devices are allowed to dynamically access the network, obtain IP addresses, and transmit performance information. If you have DHCP and DNS servers on your network, you can automatically obtain DHCP and DNS services.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.8 Administration 5.8.1 Management Save Config File Local File Select the local file for configuration Use this option to restore previously Upload saved router configuration settings. This option allows you to export and then save the router's configuration to a file on Download your computer. Be sure to save the configuration before performing a firmware upgrade.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 Management using VPN Select to enable or disable Remote Web Login Allow host remote access from Active WAN Local Web Port Enter the HTTP port number for accessing from local side Web Port Enter the HTTP port number for accessing from remote side Web Idle Timeout(0 60min) Allowed Remote IP(IP1;IP2;...) Timeout for web idle activity Allow the host with specified IP address to access from webpage.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 Sync with host Synchronize with your current host's system time NTP Settings Select your local time zone from pull down menu. Primary NTP Server Type the primary Network Time Server for synchronization. Secondary NTP Server Type the secondary Network Time Server for synchronization. NTP synchronization(1 1440min) Interval time for NTP synchronization.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.8.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.8.4 Provision Please refer to the provision user manual to test provision.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 User Agent Profile Rule The name of user agent The URL of the configuration file Note that the specified file path is relative to the root directory of the TFTP server Upgrade Enable Upgrade Error Retry Delay(sec) Select to enable or disable Interval time for retry upgrade firmware if error happen Upgrade Rule The path of firmware located 5.8.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.9 System Log If you enable the system log in Status/syslog webpage, you can view the system log in this webpage.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 5.9.1 Logout Press the logout button to logout, and then the login window will appear. 5.9.2 Reboot Press the Reboot button to reboot CDS9010.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 6 Trouble shooting of the guide 6.1 Setting your PC to get IP automatically Following are the process of setting your PC to get IP automatically Step 1.Click “begin” Step 2.Select “control panel”, then double click “network connections” in the “control panel” Step 3. Right click the “network connection” that your PC uses, select “attribute” and you can see the interface as picture 1: Step 4.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 6.2 Cannot connect to the configuration Website Solution: Check to ensure the Ethernet cable is properly connected, then Check to ensure the URL is correct, the format of URL is: http:// the IP address: 8080, 8080 must be added, then Check to ensure the version of IE is IE8, or use another browser such as Firefox or Mozilla, then Contact your administrator, supplier, or ITSP for more information or assistance. 6.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 7 Statement FCC Radiation Exposure Statement DataRemote Incorporated. Declares that this device is in compliance with the essential requirements. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Copyright © 2019 - All rights reserved by DataRemote Incorporated V1.0 This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
