User manual

The dCine can utilise streaming based technologies to display content on screen. This is done by

the dCine connecting to a streamer device over the network and then streaming the content to the

dCine for display on the projector/video output. Most streamers can provide streams to more then

one dCine at a time. Ie , one streamer on to multiple screens.

The type of Streamers supported are:

 TV: This includes typical terrestrial TV including analog and digital.

 Satellite: This includes Pay TV or any Satellite you are able to receive. (The Streamers can

accept CAM/Security cards)

 Video-Input: This includes converting a local video signal from a play-out device (ie. Tape

player) or live Camera.

Example of a streamer configuration:

<Type>Dreambox</Type>

</digitalTV>

</Streamer>

This options are defined as follows:

<Type>DeviceType</Type>

</DeviceName>

</Streamer>

Multiple <DeviceNames> can be configured. For example, you may have more then one

Satellite box and a TV box. The DeviceName given to each entry will be listed in the GUI

interface when activating the streamer.

Once selected, the dCine will contact the streamer device based on the IP address given. It will

download and make a list of available channels on that streamer which you can select via the GUI

interface. Once a channel is selected, the streamer will be programmed to pick up that channel and

start streaming it to the dCine.