User manual

Auto creation of MediaSetting.xml

When installing a system for the first time, or if you have problems with the current

MediaSetting.xml file and are having problems getting it to work, you can use the auto creation

feature.

If the dCine software starts and no MediaSetting.xml file exists, the dCine will attempt to create one

using the current setting of the system. The dCine will do the following:

1. It will set up the <IP> section with the same configured setting as currently on the network

interface. Ie, if it is staticly set, with IP, Netmask and gateway, this will go into the

MedisSettings.xml file created.

2. The current Display settings will be set. For example, if you have 2 screen active, one

1024x720 and one at 1920x1080, the <DisplayDevices> portion of the

Settings.xml will mirror these settings.

3. The rest of the MediaSetting.xml file will be based on a common standard setting.

NOTE: This auto creation section should be vetted as it is known to have errors due to updates and

upgrades to the system.