Data Sheet

ManualsBrandsDatataker ManualsData LoggersDatataker DT-80 Multi-channel data logger

DT80 Series 4 Data Logger

Intelligent Data Logging Products

Research & Development

Agricultural Research

Weather Stations

Total Energy Monitoring

Environmental Monitoring

Temperature Proﬁ ling

The Smarter Solution

The dataTaker DT80 smart data logger provides an extensive array of features that allow

it to be used across a wide variety of applications. The DT80 is a robust, stand alone,

low power data logger featuring USB memory stick support, 18 bit resolution, extensive

communications capabilities and built-in display.

The dataTaker DT80’s Dual Channel concept allows up to 10 isolated or 15 common

referenced analog inputs to be used in many combinations. With support for multiple SDI-

12 sensor networks, Modbus for SCADA systems, FTP and Web interface, 12V regulated

output to power sensors, the DT80 is a totally self contained solution.

Versatile Measurement

Connect an array of sensors through the versatile analog and digital channels, high-speed

counter inputs, phase encoder inputs and programmable serial sensor channels.

Temperature, voltage, current, 4-20mA loops, resistance, bridges, strain gauges,

frequency, digital, serial and calculated measurements can all be scaled, logged and

returned in engineering units or within statistical reporting.

Set up sampling, logging, alarm and control tasks to suit your own requirements while

interfaces for smart sensors, GPS and other intelligent devices expand the DT80 ﬂ exibility.

Superior Data Storage & Communications

With the standard unit able to store up to 10 million data points (expandable) you can log

as much or as little as you need. Overwrite or stop logging once allocated memory is full,

archive data on alarm event, copy to USB memory or transfer via FTP/ Email, the choice is

yours.

Communications features include RS232, USB and Ethernet, connect to the DT80 locally,

remotely through a modem or over the Internet. The web interface allows users to conﬁ gure

the DT80, access logged data and see current measurements as mimics or in a list using a

web browser.

FTP/ Email provides data to your ofﬁ ce over the internet or wireless network, without the

need for polling or speciﬁ c host software.

• Dual Channel Isolation Technology

• Up to 15 Analog (± 50V) sensor inputs

• Expandable to 300 analog inputs

• 12 ﬂ exible digital terminals

• 2 Serial ‘Smart Sensor’ ports

• SDI-12 (multiple networks)

• Programmable Analog Output

• Modbus for SCADA connection

• Web & FTP client / server

• USB memory for easy data and program transfer

Warranty: All dataTaker Data Loggers are covered by a 3 year warranty

on workmanship

and parts. For further information on the dataTaker range,

or for useful downloads, contact your nearest dataTaker distributor.

Quality Statement: dataTaker operates a Quality Management

System complying with IS09001:2008.It is dataT aker’s policy to supply

customers with products which are ﬁ t for their intended purpose, safe in

use, perform reliably to published speciﬁ cation and are backed by a fast

and efﬁ cient customer support service.

Trademarks: dataTaker is a registered trademark .

Speciﬁ cations: dataTaker reserves the right to change product

speciﬁ cations at any time without notice.

Designed and Manufactured in Australia.

*Our ability to provide free software and support is dependent on applicable export

control laws (including those of the United States) and the export policy from time

to time of Thermo Fisher Scientiﬁ c Inc.

Applications include:

*FREE Software & Technical Support

Thermistor Arrays

Aquaculture

Structural Monitoring

Strain Gauges

Process Monitoring

Fault Identiﬁ cation

Machine Down Time

Pressure

Load Cells

Flow

Vehicle Testing

GPS

Summary of content (4 pages)

PAGE 1
DT80 Series 4 Data Logger Intelligent Data Logging Products Applications include: Research & Development Agricultural Research Weather Stations Total Energy Monitoring Environmental Monitoring Temperature Profiling Thermistor Arrays Aquaculture Structural Monitoring Strain Gauges Process Monitoring Fault Identification Machine Down Time Pressure Load Cells Flow Vehicle Testing GPS *FREE Software & Technical Support The Smarter Solution The dataTaker DT80 smart data logger provides an extensive array of
PAGE 2
dEX Logger Software • • • • • • • Built-in software – no application to install Runs directly from your web browser Accessible by Ethernet or USB1 connection Intuitive graphical interface Easy-to-use configuration editor Access live and historical data View data as charts, mimics and tables What is dEX? dEX is an intuitive graphical interface that allows you to configure your data Easy configuration The dEX configuration editor allows you to view, edit and save logger configurations in an easy-to-use Wi
PAGE 3
dEX Logger Software Browser-based solution dEX comes pre-installed on every logger in the DT80 range2. The software loads in your web browser so there is no need to install cumbersome applications on your computer. Being browser-based, dEX is cross-platform and will work on all major operating systems including Windows, Mac and Linux. To simplify it even further, dEX starts automatically in your default web browser when you connect to your logger using a USB cable1.
PAGE 4
Technical Specifications Analog Channels Counter Channels 5 analog input channels (expandable to 100*) Each channel is independent and supports: one isolated 3-wire or 4-wire input, or two isolated 2-wire inputs, or three common referenced 2-wire inputs. The following maximums apply.