Manualshelf

Instructions

ManualsBrandsDatataker ManualsData LoggersDatataker DT-85W Multi-channel data logger
161162163164165166167168169170
UM-0085-B09 DT80 Range User Manual Page 163
RG
Preventing Configuration Changes
Once the web interface has been fully configured, you may wish to remove the configuration tool option from the Logger
home page, so that it is no longer accessible to everyday users. To do this, rename the folder b:\www\needa, which
contains the configuration tool. You can use the command interface:
RENAME b:\www\needa b:\www\needa_hidden
(If entered using DeTransfer, use \\ rather than \.)
Alternatively, connect to the DT80's FTP server and use your FTP client to rename the folder.
Enabling dEX User Level Authentication
One of the new features of dEX is an optional role based security. This is both in the firmware and the dEX side once it is
turned on. The user can turn on this role based security at anytime and it will restrict access to dEX and firmware
programming functions. Once the security is enabled the user will be presented with a login screen as pictured below.
The security can be turned on by selecting the Security screen in the Customise dEX section of the application as
pictured below. Click to check the checkbox to enable security.
Figure 56: dEX enable User Level Authentication
Once security is enabled a default admin user will have Administrator right and is automatically written to the system. A
new User Maintenance menu will appear below the Security menu. User Maintenance menu will allow user (with
Administrator right) to add another user. See dEX User Roles (P164).
And a Logout button will appear at the upper right corner of the screen. If this button is pressed, logout will commenced
and a new logging screen (Figure 57) will replace dEX Home page (Figure 22).
The default user credentials for admin user are admin (both username and password). You may need to use these
credentials to login the next time you use dEX.
Figure 57: dEX logging screen
When security is enabled the logged in user info is displayed in the bottom right hand corner of the application. The full
name of the user and the user role is displayed.