Instructions

UM-0085-B09 DT80 Range User Manual Page 164
RG
dEX User Roles
There are three user roles in dEX
• Data Supervisor
This role have a limited access only to Monitor the Logger menu which allow them to view logger status,
download or delete data. No programming function as they cannot access Configure the Logger menu or
sending a new program via Command Interface.
And since there is no access to Customised dEX menu, it is not possible to change the display inside Monitor
the Logger page including changing mimic page properties.
Figure 58: dEX home for Data Sipervisor
• Configure Logger User
This role have expanded function to allow dataTaker programming by allowing access to Configure the
Logger. Furthermore they have ability to change Monitor the Logger display including mimic page properties
since Customised dEX is also accessible.
However this role is restricted for creating/ editing/ deleting users.
• Administrator
This role is similar to Configure Logger User with an expanded function for creating/ editing/ deleting users.
Figure 59: dEX home for Config User and Administrator
When security is enabled, only one user allowed to access dataTaker. Other user will have to wait until dEX is no longer
in use (the previous user logged out). User right can be seen at the bottom right side of dEX screen.
Figure 60: dEX user right status