Instructions

UM-0085-B09 DT80 Range User Manual Page 162
RG
Help menu
This page is similar to the Measurement menu settings page, in that it allows you to disable some or all of the standard
help pages (that is, disable some or all of the items on the web interface's Help menu)
Custom help example b:\www\flash\customHelp\customHelpExample.html is no longer accessible from
this menu, but the file is still available in the memory. If you wish to create a help file with HTML formatting, the easiest
way to get started is probably to download the file from the DT80 to your PC and use it as a starting point. This can be
done by entering the following URL into a web browser:
ftp://ip-address/www/flash/customHelp
then right clicking on the file customHelpExample.html in the displayed file list and selecting Save Link as... or Save
Target as...
However the current dEX release does not offer html viewer feature anymore.
Branding
The Branding category allows you to customise certain visual elements on the web interface. Currently, this is limited to
the colour used for the thin border around the interface, and in the thick band above the main properties pane (by default,
purple).
Slide Show
The Slide-show settings control the mimic "slide show" feature (see Slideshow Mode (P156)), where the web interface
will automatically cycle through all defined mimic page. This is useful for applications where the web interface is used as
a non-interactive display. The options on this page allow you to:
• automatically start the mimic page "slide show" when the web interface is loaded
• hide the navigation menu at the left of the screen while the slide show is in operation
• automatically switch to full screen mode when the user clicks Play to start the slide show.
Security
The Security settings allow you to:
• Enable/ disable User Level Authentication (Available on firmware version 9.14 or newer).
When User Level Authentication is enabled, dEX security will active. See Enabling dEX (P163).
• Enable/ disable Lock mimic
When Lock mimic is enabled, it will restrict all changes to defined mimics. This can be achieved as Add a
mimic buttons, as well as existing mimics' Configure and Close (X) controls (see Figure 44) will no longer be
present
• Enable/ disable Lock full screen mode
When Lock full screen mode is enabled, it will disable full screen mode as the Full screen link at the top right of
the screen will no longer be present.
User Maintenance
This setting will be available when User Level Authentication is enabled. It will allow you to add/ edit/ delete dataTaker
user. See Adding/ Editing dEX Users (within Administration Right) (P165).
Language
This Language setting will allow you to set language on dEX interface. See dEX Languages (P166).
Touch Control
Available on firmware version 9.20.
This menu is designated to be used in Tablet and will give no effect in a PC. It will enable touch screen function.
Restore Defaults
Available on firmware version 9.10 or older
The configuration tool's Restore defaults button will restore the enhanced web interface to the default look and
functionality. However it will not delete any images or custom help pages that you may have uploaded to the DT80. If
required, these can be manually deleted from the
B:\WWW\flash\images and B:\WWW\flash\customHelp
folders using the
DEL command (see File Commands (P116)).