User`s manual

DT-6061 User's Manual - Platform (Build 16.0)
11/12/04 Datatek Applications Inc. 34
• total CPU time used (in 100'ths of seconds) since boot (can wrap around)
• percentage of available CPU time used since the previous 'diag dev'
• the count of events since the last 'diag dev'.
The most useful part of the report is the percentage (2nd number).
Category key:
con - arriving system console characters (very small)
sch & sclk - system scheduler clock ticks
eth0 - low-level handling of transmitted or received packets
SW+0,1,2 - handling TCP traffic
sys - total time used by applications in common platform code
app - total time in application code
sched - idle time
(sys, app, and sched do not have event counts)
The elapsed time since the previous 'diag dev' can be derived from the 'sclk' category report; its
event count represents clock ticks, or 1/100ths of seconds.
7.3.4 PING
Syntax: diag ping <IP Address>
The ping subcommand is the same as the ping command.
7.3.5 TRACERT
Syntax: diag tracert <IP Address>
The tracert subcommand is the same is the trte command.