DT-6XXX, DT-7000 EMBEDDED NETWORK PROCESSOR PLATFORM DT6BACKUP / DT6RELOAD /DT6UPGRADE DT7BACKUP / DT7RELOAD USER'S MANUAL / RELEASE NOTES RELEASE.VERSION 3.0 ISSUE 1 379 Campus Drive, Suite 100 Somerset, NJ 08873 fax: 732 667-1091 phone: 732 667-1080 email: sales@datatekcorp.com http://www.datatekcorp.
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload 02/04/10 Datatek Applications Inc.
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload TABLE of CONTENTS Introduction ................................................................................................................. 5 1.1 1.2 1.3 1.4 Mechanizing Backup and Retrieve ..........................................................................5 Bypassing FTP and Executing Upgrades From a Remote Server ........................5 Support Hosts..............................................................
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload 8.4 8.5 8.6 8.7 8.8 02/04/10 Export Restrictions .................................................................................................21 Limited Warranty .....................................................................................................21 No Other Warranties................................................................................................21 Special Provisions.......................
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload INTRODUCTION A set of host-based utilities are offered to assist in management of the DT-6x6x family and the DT-7000. 1.1 MECHANIZING BACKUP AND RETRIEVE This set of utilities allows the mechanization of the backup and retrieve/reload processes. They are called DT6backup and DT6reload respectively for the DT-6061, DT-6160, and DT-6260 family of products (DT-6XXX) and DT7backup and DT7reload for the DT-7000.
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload 2. An IP network to a DT-4XXX device where the serial console port of a product is connected. 3. An IP network directly to the telnet console of the DT-6061/DT-6160/DT-6260 platform1 or the DT-7000 telnet console. 1.4 OBTAINING THE UTILITIES In order to obtain the utilities, a user contacts Datatek who will send the utility via email. The user then copies or FTP’s the utilities to the support host.
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload The advantages of using these utilities are: The DT-6XXX/DT-7000 administrator can write a simple script with an easily remembered name containing the command lines calling the backup utilities and schedule the script to run periodically. That way the backups (and/or reloads) can be executed when system activity is not high. Also the administrator does not have to remember to run the script.
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload 4 A P P L I C AT I O N C O M M A N D S Y N TA X The DT6backup, DT6reload, DT7backup, and DT7reload commands have similar command parameters to those used for the DTbackup and DTreload utilities, with variations accounting for the connection method (TCP or BNS) and another variation due to the fact that the retr command on some units requires parameters.
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload One of the following options: the –sa option, the –sp option or the –sP option must be given in the command line. If one of the latter two options is chosen, the password for logging into the FTP server that receives the backup file is either specified on the command line or prompted with echo off. 4.1.
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload 4.2 DT7BACKUP 4.2.
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload 4.2.
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload 4.3 DT6RELOAD 4.3.
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload One of the following options: the –sa option, the –sp option or the –sP option must be given in the command line. If one of the latter two options is chosen, the password for logging into the FTP server that retrieves the backup file is either specified on the command line or prompted with echo off. 4.3.
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload 4.4 DT7RELOAD 4.4.
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload 4.4.
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload 4.5 DT6UPGRADE This utility requires the minimum level or higher of the platform software (see Table 1: Minimum Platform Software, page 5). 4.5.
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload 4.5.
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload 5 N O T E S O N A P P L I C AT I O N O P E R AT I O N The parameter on the command line is normally associated with the current host. If the –sa option is not used, the parameter is associated with the FTP server. If the –sn option is used and that server is different from the support host running one of these utilities, then the filename must be specified with a leading ‘/’.
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload 6 I N S TA L L AT I O N A D D E N D U M 6.1 OBTAINING INFORMATION FROM DATATEK APPLICATIONS INC. Load modules for all the Datatek migration products are obtained by sending email to either Bill Arndt at arndt@datatekcorp,com or Dan Conklin at conklin@datatekcorp.com. All other documentation, including release notes, user manuals, “white-papers”, etc. can be accessed on the Datatek web site and downloaded for your use. 6.
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload 8 END-USER LICENSE AGREEMENT FOR S OFTWARE This License Agreement ("License") is a legal contract between you and the manufacturer ("Manufacturer") of the software product(s) you acquired identified as ("SOFTWARE"). The SOFTWARE may include printed materials that accompany the SOFTWARE.
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload Manufacturer for any other reason, please refer to the address provided in the documentation for the SOFTWARE. 8.4 EXPORT RESTRICTIONS You agree that you will not export or re-export the SOFTWARE to any country, person, or entity subject to U.S. export restrictions. You specifically agree not to export or re-export the SOFTWARE: (i) to any country to which the U.S.
Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0 DT7backup, DT7reload and supercedes any and all prior or other communications, statements, documents, agreements or other information between the parties with respect to the subject matter hereof. 8.