Instruction manual

25
11. Mode: selects the T-Bar operating mode of the SE-800, between Video
(default), Audio, GPI, and Play. For more information, see Mode select
in the Using Transitions section, page 35, and Mode select in the
Using Effects section, page 41.
12. T-Bar: used to manually perform a transition. For
more information, see Playing a Transition
Manually, page 35.
13. Chroma Key: when engaged, this removes the selected color from the
Main Video Source and reveals the corresponding portions of the Sub
Video Source. Repeated presses of the Color up and down buttons selects
the color to be removed. Repeated presses of the Level up and down
buttons sets how much of the color will be removed. Color and level
information are displayed in the windows above the Keypad (18.). For more
information, see Chroma Key, page 45.
14. Picture in Picture: puts the selected Sub Video Source in
a window on the Main Video Source, with control over
window size and placement. Used in conjunction with
the Border keys (10.) For more information, see Effects:
Picture in Picture, page 43.
15. Paint: when engaged (and the Paint LED is lit), this applies a posterized effect
to the selected Main Video Source. Repeated presses of the up and down
buttons set the intensity level of the effect, from 1 (least) to 4 (most). The level
setting is displayed in the Effects window above the Keypad (18.). For more
information, see Effects: Paint, page 43.