Instruction manual

27
21. Faders: sliders to control audio levels for the Main
audio output mix. Each is active when the LED on the
Audio bus selector button (22.) above it is lit. For more
information, see Audio Inputs, Levels, and Meters,
page 32.
22. Audio Bus selectors: the LEDs
indicate which of the audio
inputs are active in the Main
audio output mix. Press the
button to either include or exclude the channel. The left button, labeled Mic/Aux, can be set to either
Mic, Aux, or off. For more information, see Audio Inputs, Levels, and Meters, page 32.
23. Headphones: controls Headphone level and signal(s)
present at the Headphone jack (26.). Level is controlled by
the rotary pot. Signals present are indicated by the LEDs,
and are selected by repeated presses of the Headphone
button. For more information, see Outputs and Monitor,
page 13 and Audio Inputs, Levels, and Meters, page 32.
24. Voice Sync: adjusts for audio delay or advance from –19 to
+3 frames for the Audio Input that is fed from the selected
Video channel. For more information, see Voice sync, page
34.