Instruction manual

65
5). Selectable AGC ON/OFF control
Procedure to turn Off/On the video input Auto Gain Control (AGC)
6). Adjustable video position (about 50 lines up or down) for external SDI overlay video.
Some SDI overlay cards and CG software have varying offsets of the CG overlay video position; this function
enables a calibration to correct the overlay position.
Operation procedure:
S1. Click on Setup button to select
channel A, B, C or D
S2. Select Effect: “02” and “Enter”
S3. Click on the “SPD” key to
toggle speed LED display
“Y” (with AGC control) or
“N”(without AGC Control)
S4. Click on SETUP button to exit
and save the setting condition.
S1. Click on Setup button to cycle 4
channels LED on.
S2. Select Effect: “01” and “Enter”
S3. Click on the “UP” or “DOWN” key to
adjust position. At this stage the
adjusted line number will display on
the two digits EFFECT LED
S4. Click on SETUP button to exit and
save the setting condition.
UP
DOWN