Instruction manual

71
6. The return parameter of SE800 control command status
5th 6th 7
th
8th 9th 10th 11th 12th ,,,
Parameter
#0
Parameter
#1
Parameter
#2
Parameter
#3
Parameter
#4
Parameter
#5
Parameter
#6
Parameter
#7
,,,
Error code Effect
No.
Effect
Speed
LED1 LED2 LED3 LED4 LED5 ,,,
1) The error code
01h = Time out (over 15ms)
02h = length error
03h = checksum error
04h = not support command
05h = operated error
2) The effect No.
The value from 0 to 99(63h)
3) The effect No.
The effect speed from 0 to 15(fh)
4) LED data (Updated on Dec-01-2003)
The bit = high = LED on
Bit0 of LED1 = LED of key_take (on the right down angle of the speed LED of SE800)
Bit1 of LED1 = LED of key_gpi_play
Bit2 of LED1 = LED of key_gpi
Bit3 of LED1 = LED of key_tbar_audio
Bit4 of LED1 = LED of key_tbar_video
Bit5 of LED1 = LED of key_wipe
Bit6 of LED1 = LED of key_zoom
Bit0 of LED2 = LED of key_main_a
Bit1 of LED2 = LED of key_main_b
Bit2 of LED2 = LED of key_main_c
Bit3 of LED2 = LED of key_main_d
Bit4 of LED2 = LED of key_main_bk
Bit5 of LED2 = LED of key_miscel = key_MISC.
Bit6 of LED2 = LED of key_fade
Bit0 of LED3 = LED of key_sub_a
Bit1 of LED3 = LED of key_sub_b
Bit2 of LED3 = LED of key_sub_c
Bit3 of LED3 = LED of key_sub_d
Bit4 of LED3 = LED of key_sub_bk
Bit5 of LED3 = LED of border_on
Bit6 of LED3 = LED of border_soft
Bit0 of LED4 = LED of mosaic.
Bit1 of LED4 = LED of paint
Bit2 of LED4 = LED of pip
Bit3 of LED4 = LED of key_RGB_correction
Bit4 of LED4 = LED of key_freeze
Bit5 of LED4 = LED of key_position
Bit6 of LED4 = LED of background_on
Bit0 of LED5 = LED of key_f1
Bit1 of LED5 = LED of key_f2
Bit2 of LED5 = LED of key_f3