HDR-10 HD/SD Highlight Replay Recorder Introductory Guide
Contents Warnings and Precautions ................................................................................................................................. 2 Warranty ............................................................................................................................................................ 3 Standard Warranty ......................................................................................................................................... 3 Two Year Warranty ..
Warnings and Precautions 1. Read all of these warnings and save them for later reference. 2. Follow all warnings and instructions marked on this unit. 3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this unit in or near water. 5. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious damage. 6.
Warranty Standard Warranty Datavideo equipment is guaranteed against any manufacturing defects for one year from the date of purchase. The original purchase invoice or other documentary evidence should be supplied at the time of any request for repair under warranty. Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered by this warranty. All mail or transportation costs including insurance are at the expense of the owner.
Introduction The HDR-10 is a Highlight Replay Recorder (3G/HD/SD SDI) capable of capturing specific, desired or special scenes during any sports game. The captured scene is then output to the switcher as a replay. The HDR-10 also allows the user to store the chosen Highlights into removable compatible media (2.5” SSD recommended). The User controls the unit with a simple USB 2.0 compatible Jog/Shuttle wheel which has five function buttons.
Functions Front Panel Media Locking Switch Rear Panel DC In Socket (12V) ON/OFF Switch USB 2.
Quick Operation Instruction To operate the HDR-10, the user needs to be familiar with the supplied Contour Shuttle Express USB 2.0 controller. When viewing the HDR-10 AUX SDI output, relevant controller buttons or wheels are annotated as an OSD menu in the lower left hand corner of the video with a number or icon assigned to each. This OSD menu is not shown on the separate PGM SDI output.
Capture Mode The HDR-10 automatically enters this mode when it is first powered on and this mode can also be selected from the OSD Home menu by the user. In capture mode video is buffered or saved to working memory only. This memory is depicted by a growing red buffer line at the bottom of the AUX OSD display. This memory buffer will only store up to the latest 30 seconds of video. Once the buffer memory is full the line stops growing and the HDR-10 starts recycling memory or buffer space.
Review Mode The HDR-10 automatically enters this mode when capture mode is exited. This mode can also be selected from the OSD Home menu by the user. The buffer line has also changed colour to green to quickly confirm the mode has changed. The clip marked between the start and exit buttons being pressed in capture mode can now be reviewed, edited further or saved to the removable SSD media as an uncompressed .MOV file.
Replay Mode The HDR-10 automatically enters this mode when review mode is exited. This mode can also be selected from the OSD Home menu by the user. The buffer line has also changed colour to blue to quickly confirm the mode has changed.
Home menu After entering the Home menu, the menu options can be seen at the top center of the AUX output OSD. The relevant controls are annotated in the lower left hand corner of the AUX screen. The small inside wheel on the jog/shuttle controller allows the user to scroll up/down the Home menu. To make the selection, simply press the No. 1 control button on the controller.
Firmware Upgrade Upgrading the Firmware involves upgrading the HDR-10 (Recorder) portion of the unit first and then the Controller portion of the unit. Recorder portion: 1. Format the SSD drive within the HDR-10 and then connect the SSD to your computer. 2. Copy the supplied flash.bin file to the root directory of the SSD. 3. Safely eject the media from the computer and return the SSD to the HDR-10. 4. Go to the UPGRADE FIRMWARE option in the Home menu and follow OSD directions.
Specification Model Description Housing Size HDD Size Removable SSD / HDD 3G/HD/SD-SDI Input Connector File Format 2 LISN 1 USB 1 GPI DC IN MOV 1 1 V 720P@50/59.94/60 1080i@50/59.94/60 HD 3G Colour Format Uncompressed Size (GB) Channels Navigation Internal Buffer Cues Highlight Remark 1 3G/HD/SD-SDI Output Video Format Codec HDR-10 Specifications HDR-10 HD/SD Recorder, Player, Highlight Replay Recorder Standalone Type No size limitation V 1080p@50/59.
Service and Support 13