Quick start Guide

Replay Mode

The HDR-10 automatically enters this mode when review mode is exited. This mode can also be

selected from the OSD Home menu by the user.

The buffer line has also changed colour to blue to quickly confirm the mode has changed.

Play the replay clip

Repeat

Repeat the replay clip for unlimited counts until the button is pressed

again

Ext/Int T

Switches between GPI trigger or Contour Shuttle Express controller trigger

Speed

↓↑

Change play speed

Exit

Exit the Replay mode and move to the Home menu

Capture and Replay

1. Power on the HDR-10 and by default, the HDR-10 will be in the capture mode.

2. The HDR-10 will start capturing once it is in the capture mode.

3. Press the No. 2 controller button to place the start marker.

4. To stop capturing, press the No. 5 controller button (EXIT) to enter the Review Mode

5. In the Review Mode, use jog and shuttle wheels to adjust the cursor position and once the

cursor is at desired position, place the start marker or the end marker.

6. Press the No. 2 controller button to place the start marker and press the No. 4 controller

button to place the end marker.

7. Press the No. 5 controller button to exit the Review Mode after the start and end points are

determined.

8. Go to the Replay Mode

9. To start the replay, simply press the No. 1 controller button ( )

Recalling a previously saved Clip

1. On the home mode menu, select Media

2. To select the desired bin number, select “SELECT BIN” on the Media Sub-Menu

3. After the bin number is selected, select the “Recall Clip” option to load the desired clip

4. Select “SELECT CLIP” to start clip selection, which can be done by using the jog wheel to

cycle through the available clip numbers

5. After the desired clip is selected, the user can either clear the memory buffer content and

load the selected clip (Clear and Recall) or append the selected clip to the existing buffer

content (Recall Append)

6. After the clip is loaded, exit the Media Sub-Menu back to the Home Mode and then select

the Replay Mode

7. To start the clip replay, simply press the No. 1 controller button ( )