Quick start Guide

Firmware Upgrade

Upgrading the Firmware involves upgrading the HDR-10 (Recorder) portion of the unit first and

then the Controller portion of the unit.

Recorder portion:

1. Format the SSD drive within the HDR-10 and then connect the SSD to your computer.

2. Copy the supplied flash.bin file to the root directory of the SSD.

3. Safely eject the media from the computer and return the SSD to the HDR-10.

4. Go to the UPGRADE FIRMWARE option in the Home menu and follow OSD directions.

This process can take up to 2 minutes to complete, please be patient.

Controller portion:

1. Copy the supplied update.bin file to a USB Flash drive at the root directory.

2. Turn power to the HDR-10 unit OFF.

3. Disconnect the USB Jog/Shuttle Controller and connect the Flash Drive in its place.

4. Turn power to the HDR-10 unit ON and the unit will upgrade itself.

5. When finished, turn power OFF and return the Jog/Shuttle controller to the HDR-10.

This process can take up to 2 minutes to complete, please be patient.

Formatting Storage Media

Follow the procedure below to format SSD media in your HDR-10:

WARNING: Formatting the SSD will destroy any existing files already on the SSD. Back up

any important files before formatting a previously used SSD in the HDR-10.

1. Go to Home menu.

2. Select Media  Format media.

3. A Format prompt screen will appear to ask for confirmation; select “Yes”

4. Formatting will progress until finished

5. System returns to media menu after formatting is completed.