Quick start Guide

7
Capture Mode
The HDR-10 automatically enters this mode when it is first powered on and this mode can also
be selected from the OSD Home menu by the user.
In capture mode video is buffered or saved to working memory only. This memory is depicted
by a growing red buffer line at the bottom of the AUX OSD display.
This memory buffer will only store up to the latest 30 seconds of video. Once the buffer
memory is full the line stops growing and the HDR-10 starts recycling memory or buffer space.
During this recycle process the oldest video frames captured are lost in order to save the latest
video data being supplied to the HDR-10.
When the user presses button 2 on the Jog/Shuttle controller a start flag or box is shown
progressing along the red buffer line. This marks the beginning of a possible video highlight to be
replayed. When the user decides enough video has been captured for the highlight clip button 5 is
pressed to end capture mode and the unit automatically enters Review Mode.
2
Drop start cue sets the start point of a particular replay clip
EXIT
5
Exit highlight Capture mode and enter Review mode