Quick start Guide

8
Review Mode
The HDR-10 automatically enters this mode when capture mode is exited. This mode can also
be selected from the OSD Home menu by the user. The buffer line has also changed colour to
green to quickly confirm the mode has changed.
The clip marked between the start and exit buttons being pressed in capture mode can now be
reviewed, edited further or saved to the removable SSD media as an uncompressed .MOV file.
1
Save the currently marked clip, between the Start and End points, as an
uncompressed MOV file to the removable SSD media.
2
Drop Start Cue marker at current position
Go to Start Cue marker
3
Toggles the unit between Drop Marker or Go To marker mode
4
Drop End Cue marker at current position
Go to End Cue marker
Jog (inside wheel) : Frame-By-Frame fine tune
Shuttle (outside wheel): Fast forward or rewind at 1x, 2x or 4x speed
5
Exit the Review mode and move to Replay mode
Saving an edited clip or highlight to MOV file
The HDR-10 only saves the marked clip/highlight on the buffer line to the removable SSD as an
uncompressed MOV file. The file size will be large, up to 4GB, depending on the clip length in
seconds. The saved clip can be replayed from the unit at a later stage or added (appended) to
other clips on the same SSD. The SSD removed from the HDR-10 can also be used to transfer saved
clips to a non-linear editing computer.
1. Power on the HDR-10 and by default, the HDR-10 will be in the capture mode.
2. Press the No. 2 control button to place the start marker.
3. To stop capturing, press the No. 5 control button (EXIT) and enter the Review Mode
4. In Review Mode, use jog and shuttle wheels to adjust the cursor position and once the
cursor is at desired position, replace the start marker and/or the end marker.
5. Press the No. 1 control button ( ) to save after the start and end points are determined.