User Manual
Table Of Contents
- Contents
- FCC Compliance Statement
- Warnings and Precautions
- Warranty
- Disposal
- Chapter 1 Introduction
- Chapter 2 Connections and Controls
- Chapter 3 Network Setup
- Chapter 4 Switcher OSD MENU
- Chapter 5 Video Streaming
- Chapter 6 Advanced Operations
- Chapter 7 Monitor OSD MENU Options
- Appendices
- Service and Support
10
2.1 Rear Panel Connections
1. POWER SWITCH
Switches the power On / Off.
2. DC Power Input
Connect the supplied 12V 5A PSU to this 4 PIN XLR socket.
3. Monitor HDMI IN (External Video Input)
The HS-1300 provides a useful connection for confidence
monitoring of HDMI sources on location.
Connect one external HDMI input source for monitoring the
live show.
Video Input Modules: The HS-1300 is equipped with six video input channels. Connect the respective
video sources to these video input channels.
4. HDMI Video Input 1-2
The Video Input set includes two HDMI ports.
Note: Please set the INPUT SOURCE in the Switcher Menu.
5. SDI Video Input 1-4
The Video Input set includes four SDI connectors.
Note: Please set the INPUT SOURCE in the Switcher Menu.
6. SDI Video Output 1-2
The BNC output connector is a user defined SDI output.
Note: Please set the OUTPUT SOURCE in the Switcher
Menu.