User Manual

13
Keyer Source
Selection of Keyer Source from Program / Preset Row
Keep holding down one of these buttons to enter key select mode and
fill select mode. Select key source from the Program row and fill source
from the Preset row.
The selected source button will flash.
KEYER SETUP
Press this button to open Keyer configuration menu on the Multi view
output, and the opened configuration menu corresponds to the selected
keyer (Key 1/Key 2/DSK 1/DSK 2).
DSK AUTO
Auto DSK transition function either transitions “DSK 1 or DSK 2
individually” or transitions “DSK 1 and DSK 2 simultaneously”
PIP Effect
PIP enables the PIP key mode
PIP LITE enables the PIP LITE key mode
Background Transition & GRAB
TRANS BG enables Background Transition between Program / Preset
GRAB grabs the current Program video image to Input 6.
Wipe Border Setting
BDR ON/OFF turns the WIPE border function ON/OFF
BDR SOFT configures the WIPE border softness
BDR COLOR selects the WIPE border color
BDR SIZE adjusts the WIPE border thickness
Wipe Transition Selection
WIPE Transition Selection
The HS-1300 has 8 user defined wipe buttons that allow the user to select WIPE
transition effect directly from the control panel.
The REV button reverses the direction of the selected WIPE.
All wipes can have an optional colour border applied. The wipe border width and
colour are chosen within the menu system.