User Manual
Table Of Contents
- Contents
- FCC Compliance Statement
- Warnings and Precautions
- Warranty
- Disposal
- Chapter 1 Introduction
- Chapter 2 Connections and Controls
- Chapter 3 Network Setup
- Chapter 4 Switcher OSD MENU
- Chapter 5 Video Streaming
- Chapter 6 Advanced Operations
- Chapter 7 Monitor OSD MENU Options
- Appendices
- Service and Support
17
Source Select Buttons
Select the type of source you are using - HDMI, MV (multi-view), PGM
(program).
HDMI
Switch the 17.3” built-in monitor to display the video source plugged into
the MONITOR HDMI IN port.
BLUE
Press this button to eliminate the red and green component of input
signals. Only the blue component of an input is displayed on the screen.
MV
Press this button to set the Monitor to MULTIVIEW mode.
PGM
Press this button to set the Monitor to PROGRAM view.
PTN
When pressed displays internally generated SMPTE 75% Colour Bars. Press
again to return to the previously selected video input.
ZOOM
This feature is designed for use with HD-SDI and HDMI sources above 720p
resolution. Press this button to zoom in to the video on the display. This is
strictly a zooming function and does not alter the native aspect ratio of the
source pixels to fill the screen.
The ZOOM button allows you to togg
le the Pixel Zoom feature between
zoom x1, x2, x4 and x8.
Menu Navigation Buttons
Display and navigate the set up menus - See Monitor Menu Options for
more details.
Aspect Ratio Button
Sets the Aspect Ratio to 16:9 / 4:3
Volume Control
Adjusts the speaker / headphone volume up / down.
MUTE
Mutes the audio from the internal speakers or headphone socket.