User Manual

29
Freeze
1
Sets the Frame store mode of Input 1 to Clip / Still /
Freeze / Live
2
Sets the Frame store mode of Input 2 to Clip / Still /
Freeze / Live
3
Sets the Frame store mode of Input 3 to Clip / Still /
Freeze / Live
4
Sets the Frame store mode of Input 4 to Clip / Still /
Freeze / Live
5
Sets the Frame store mode of Input 5 to Clip / Still /
Freeze / Live
6
Sets the Frame store mode of Input 6 to Clip / Still /
Freeze / Live
User Mems
Load Mem
Memory
Memory Selection from 1 to 999
Load
Selection of this button loads the selected memory
Save Mem
Memory
Memory Selection from 1 to 999
Save
Selection of this button saves to the selected memory
Load Clip
Load
Selection of this button loads the selected clip
Clip Memory Location
Memory locations from 0 to 999
Thumbnail Clip - 1
Preview of the previous clip
Thumbnail Clip
Preview of the clip to be loaded
Thumbnail Clip + 1
Preview of the next clip
Clear Clip
Clear the loaded clip
Delete Clip
Remove the clip from the memory location
Setup
Standard
1080i/50
Resolution Selections from
1080i/50/59.94/60
720p/60/59.94/50
Save Setup Saves the selected resolution
Audio Level
EBU
SMPTE
AUTO
Menu Mode
Advanced
Full
Basic
Reduced
Menu Pref
Blue / Grey
Selection of menu color
Transp
Menu transparency level of 0/1/2
Size
Menu size of Normal/Small/Large
Menu Pos
Bottom
Right
Left
Top
Centre
This option sets the menu position
Auto Save ON / OFF
Automatically saves the last settings before the machine
is shut down; once turned ON auto save also occurs
upon every Still Load.
Factory Def
Reset
Factory Default Reset loads the default configuration
from memory point 0 for all configuration options except
for the Setup.
Reset Names Resets the Multiviewer labels to the default settings
Network Default Resets the network settings
Language
English
Traditional Chinese
Simplified Chinese
Software Upgrade
This starts the FW upgrade process
Please refer to the Firmware Upgrade section for the USB
firmware update process.