User Manual

38
Load Still
Upon selecting “Load Still”, the user can then choose the memory location from which the still image is
loaded. The following are the destinations to which the still image can be loaded:
• Input 6
• Input 5
• Input 4
• Input 3
• Input 2
• Input 1
Select “Load” to load the still image to the determined destination.
Image Preview is available below the “Load Still” row. “Image Preview – 1” allows the user to preview the
previous image, “Image Preview” displays the image that will be loaded when “Load” is selected, and
“Image Preview + 1” shows the next image.
Save Still
“Save Still” allows the user to save the still image to a specific memory location. The user should
determine the source of the still image first. The available sources are listed below:
• Input 6
• Input 5
• Input 4
• Input 3
• Input 2
• Input 1
To complete the save, the user can simply select “Save” after determining the memory location.
Grab Still
In this sub-option, select “Grab” to capture the current program view and save it to Grab Destination (Input
1 to Input 6).
Freeze
“Freeze” allows the user to load an image to Inputs 1-6 from one of the four sources listed as follows:
• Clip
• Still
• Freeze
• Live
User Mems
In this option, the user is allowed to load previously saved settings and save the currently configured
settings.
Advanced Mode = Basic Mode
User Mems
Load Mem
Memory
1
Load
Save Mem
Memory
1
Save
Load Clip
Load
Clip
1
Thumbnail Clip – 1
Thumbnail Clip
Thumbnail Clip + 1
Clear Clip
Delete Clip