User Manual
Table Of Contents
- Contents
- FCC Compliance Statement
- Warnings and Precautions
- Warranty
- Disposal
- Chapter 1 Introduction
- Chapter 2 Connections and Controls
- Chapter 3 Network Setup
- Chapter 4 Switcher OSD MENU
- Chapter 5 Video Streaming
- Chapter 6 Advanced Operations
- Chapter 7 Monitor OSD MENU Options
- Appendices
- Service and Support
79
GPI Connection
The HS-1300 can control external recorder/playback devices via simple contact closure GPI switch.
The GPI interface is a 3.5mm Jack Socket which is situated on the rear panel of the HS-1300.
Contact closure between the Outer and Inner contacts on the jack plug will trigger a user selected event.
Power is supplied by the HS-1300 and is less than 5V DC.
This GPI socket can also be used as a socket to trigger record or playback events with other equipment
such as the Datavideo HDR-70 recorder.
SAFETY FIRST The cabling required needs to be designed specifically to connect the HS-1300 to the chosen
record or playback device as they are not all the same. The cabling required can be made by yourself
or a competent technician. Please speak with your Dealer or local Datavideo office to get further help and
advice.