Instruction manual

After a few seconds the message will change to READING, and after a few more seconds it will return to
the general display.
DVD+RW
Press the Eject button, the message OPEN will be displayed on the LCD display, and the disc tray will
open.
Place a DVD+RW disc on the disc tray; label/printed side up.
Press the Eject button again, so that the tray retracts, and the CLOSE message appears.
After a few seconds the message will change to READING, and after a few more seconds it will return to
the general display.
If the disc has not been used previously, it must first of all be formatted.
On the TV monitor you will see this message
After about 20 seconds the message will disappear, and the disc is ready to use.
If the disc has been used previously it will not be necessary to format it, the MP-6000MD will check the disc
and you can start recording immediately. If there are other tracks on the disc that you would like to erase
please see the chapters, “Erasing a DVD+RW Disc” and “Erasing the Last Title from a DVD+RW Disc”.
26