User's Manual

11
STREAM Button
The STREAM button activates and deactivates the STREAM Only
mode; follow the steps outlined below:
Start streaming
 When idle, the STREAM button is solid white.
 Press and hold the STREAM button for approximately 2 seconds.
 When the stream function is activating, the STREAM button turns from solid
white, then blinking red and finally to solid red.
 When the STREAM button turns solid red, this indicates that the record
function has been successfully activated.
Stop streaming
 While streaming, the STREAM button is solid red.
 Press and hold the STREAM button for approximately 2 seconds.
 When the stream function is terminating, the STREAM button turns from solid
red, then blinking red and finally to solid white.
 When the STREAM button turns solid white, this indicates that the stream
function has been successfully terminated.
Vertical Button
Press the Vertical button to switch video orientation between
Portrait and Landscape. See Section 3.4 for details.
Note: You can also switch video orientation via web user
interface; see descriptions of the Vertical page for details.
2.2 Rear Panel