User's Manual
Table Of Contents
- Table of Contents
- FCC Compliance Statement
- Warnings and Precautions
- Warranty
- Disposal
- 1 Introduction
- 2 Connections and Control
- 3 Video Streaming
- 4 Firmware Upgrade
- 5 Recommended SD Cards
- 6 Frequently-Asked Questions
- 7 Dimensions
- 8 Specifications
- Service and Support
16
- On the command prompt, enter ipconfig/flushdns followed by
ipconfig/release and ipconfig/renew.
3.2 Web User Interface
By now, we have obtained the IP address of the NVS-34. To open the web user
interface, either double click the device’s IP on the IP finder or enter the device’s IP
into the address bar of a web browser then hit the ENTER button. Log in by entering
the username as well as the password into the pop-up dialogue box as shown below.
- Username: admin
- Password: 000000
Click OK to log in.
Source
You will see the Source page immediately after logging into the web UI, on which
first select the video source, SDI or HDMI.
If you’ve selected SDI, you only need to select the audio source next. The available
audio source options are Embed, Line-In and Mixer. Descriptions of which are
outlined as follows:
Embed: SDI embedded audio
Line-In: External audio from RCA AUDIO IN jacks
Mixer: A mix of SDI and HDMI embedded audio as well as RCA AUDIO IN