User's Manual
Table Of Contents
- Table of Contents
- FCC Compliance Statement
- Warnings and Precautions
- Warranty
- Disposal
- 1 Introduction
- 2 Connections and Control
- 3 Video Streaming
- 4 Firmware Upgrade
- 5 Recommended SD Cards
- 6 Frequently-Asked Questions
- 7 Dimensions
- 8 Specifications
- Service and Support
19
While monitoring streaming and recording, please update the page periodically
regardless of how you operate the device (using the device’s physical buttons only or
using the device’s physical buttons along with the web UI). This ensures the page is
always displaying the most up-to-date information.
Operation Mode
Click the Operation Mode tab on the tool bar to open the operation mode
configuration page on which the user will be allowed to customize various stream
and record settings.
The NVS-34 offers the following operation modes:
Stream
Record
which will be discussed in detail in this section.
Stream Mode
The NVS-34 has two stream engines allowing you to stream to two different
destinations over multiple protocols such as RTSP, RTMP, TS and HLS. See Section
3.3 for instructions on each individual stream setup.
The configurable stream video settings are Encoder Source, Stream Type, Resolution,
Frame Rate, Profile, Level, Entropy, GOP and Video Bitrate (bps) which will be
described later in this section.