User's Manual
Table Of Contents
- Table of Contents
- FCC Compliance Statement
- Warnings and Precautions
- Warranty
- Disposal
- 1 Introduction
- 2 Connections and Control
- 3 Video Streaming
- 4 Firmware Upgrade
- 5 Recommended SD Cards
- 6 Frequently-Asked Questions
- 7 Dimensions
- 8 Specifications
- Service and Support
26
5
3
2
1
Record Mode
The NVS-34’s record engine allows you to record your program on the SD card. See
Section 5 for a list of recommended SD cards. The record parameters shown in the
diagram below will be discussed in detail in this section.
Note that after you’ve configured the record settings, click “Apply” to apply the new
record settings. Click “Start Record” to start recording and “Stop Record” to end
recording. To reset, simply click the default button.
Encoder Source
This option allows you to enable the record engine for configurations of various
recorder parameters. If the recorder is not needed, disable this option.