User's Manual
Table Of Contents
- Table of Contents
- FCC Compliance Statement
- Warnings and Precautions
- Warranty
- Disposal
- 1 Introduction
- 2 Connections and Control
- 3 Video Streaming
- 4 Firmware Upgrade
- 5 Recommended SD Cards
- 6 Frequently-Asked Questions
- 7 Dimensions
- 8 Specifications
- Service and Support
48
Follow the steps below to overlay text on the video:
1. Open the CG settings page.
2. Set the CG layer.
3. Select the CG Type.
4. If Text is selected, enter the overlay text in the Text field, otherwise browse
for the picture file on the disk.
5. Enter the X and Y coordinates to set the CG object position.
6. If you have selected the picture CG, you will need to adjust the object’s
width and height as well.
7. Set the foreground color.
8. Click Apply button to save CG settings.
Note: Increasing the X coordinate moves the overlay text to the right and
decreasing the X coordinate moves the overlay text to the left; increasing the Y
coordinate moves the overlay text up and decreasing the Y coordinate moves the
overlay text down.