User's Manual
Table Of Contents
- Table of Contents
- FCC Compliance Statement
- Warnings and Precautions
- Warranty
- Disposal
- 1 Introduction
- 2 Connections and Control
- 3 Video Streaming
- 4 Firmware Upgrade
- 5 Recommended SD Cards
- 6 Frequently-Asked Questions
- 7 Dimensions
- 8 Specifications
- Service and Support
50
When the record function is activating, the RECORD button turns from solid
white, then blinking red and finally to solid red.
When the RECORD button is solid red, this indicates that the record
function has been successfully activated.
Stop recording
While recording, the RECORD button is solid red.
Press and hold the RECORD button for approximately 2 seconds.
When the record function is terminating, the RECORD button turns from
solid red, then blinking red and finally to solid white.
When the RECORD button is solid white, this indicates that the record
function has been successfully terminated.
Stream Button
Press the STREAM button to start/stop streaming.
The table below summarizes the STREAM Button LED behaviors:
STREAM Button
Solid White
Stream function in idle state
Blinking Red
Stream function is activating or resetting
Solid Red
Stream function activated
Start streaming
When idle, the STREAM button is solid white.
Press and hold the STREAM button for approximately 2 seconds.
When the stream function is activating, the STREAM button turns from solid
white, then blinking red and finally to solid red.
When the STREAM button is solid red, this indicates that the record
function has been successfully activated.
Stop streaming
While streaming, the STREAM button is solid red.
Press and hold the STREAM button for approximately 2 seconds.