Ethernet Control Box USER MANUAL RMC-120

23
FAQ
1. Q: When I select BACKGROUND, the “ON” button starts
blinking. Sometimes it will speed up, but sometimes it will
slow down. Is it normal?
A: Yes, it’s normal, and it will not affect the performance.
2. Q: When I use GPI control, occasionally the “PLAY” key will
turn on in SE-800 switcher. Why the remote interface doesn’t
turn on?
A: It’s normal. Don’t need to worry.
3. Q: While programming the function keys is in process, three
seconds after I pressed “ENT” key, the remote interface will
display number “555”. Is that normal?
A: We already notice this problem, and will fix it in next
version software.
4. Q: Are all SE-800 can be controlled by RMC-120?
A: No. RMC-120 can only use with SE-800 ROM A: v5.6;
ROM B: v2.4, or later version firmware.
5. Q: How do I check my SE-800 firmware version?
A: For the ROM A, when SE-800 turns on, please check the
digital number which shows on “EFFECT” and “SPEED” if
it’s showing 5.6 as below.
05 6
EFFECT SPEED