User Manual

30
3.2 Connecting the SEConfig Software to the Switcher
1. Double click the SEConfig DV icon to launch the application.
2. If you immediately get an error
window, do not worry, this just means
the “PC Control” button in the MENU
area of the SE-2850 keyboard has not
been enabled.
3. Make sure the “PC Control” button is
enabled and then click OK.
4. Select Ethernet to display the
Computer’s IP Address. Click the Find
button to find and display the SE-2850
Switcher’s IP Address in the drop
down list. The first three octets in
both IP addresses should match. See
the example on the left.
5. Click Connect and additional function
tabs will immediately become
available at the top of the application
window. These are:
• Switcher
• Settings
• Images Upload
• M/V Input Source Labels
• M/V Layout
• M/V ‘A’ Upload
• M/V ‘B’ Upload
• M/V ‘C’ Upload