Datasheet

10
Color Processor
The built in color processor is very easy to use. The memory is non-volatile, so settings are saved, even
when the STC-100 is powered off.
Setting the contrast, brightness, color saturation and tint (TINT is only for NTSC Composite or S-Video
inputs), follows a similar procedure. In this example we are adjusting the contrast.
Make sure that you have a signal running from your video source (player) and a monitor connected to your
record deck. You should be able to see the video image from the player on the monitor.
To adjust the contrast, press the CONTRAST
Button.
(The procedure would be the same if you wanted
to adjust the brightness, color saturation or tint.
(TINT is only for NTSC Composite or S-Video
inputs)
You will see the Contrast setting bar appear at
the bottom of the TV screen
To reduce the contrast, press the – button.
Repeated presses of the – button will gradually
decrease the contrast.