Datasheet

11
To increase the contrast, press the + button.
Repeated presses of the + button will gradually
increase the contrast.
Once set as required, press the CONTRAST button to exit; the setting bar will disappear from the TV
monitor.
To reset any value (contrast, brightness, color or
tint) press and hold the + or – button for four
seconds
Factory Reset
Factory reset will return all color processor settings to neutral (factory default).
To return the STC-100 to factory defaults, press and hold the YUV button
for 5 seconds
You will see the selected video input light (YUV, S(Y/C),CV) flash three times when reset has taken place.