User Manual

17£ ¢
15£ ¢
Connecting a PC
1. Turn off your computer and monitor.
2. Connect a PC D-Sub (VGA) cable between your PC and VGA of the
monitor. And then fasten the screws of both sides of the cable.
3. Connect a DC Power cable to the power
input jack of the monitor.
4. Power on the computer before turning on the monitor.
LCD MONITOR
USER'S MANUAL
¥ ° . Parts Description
POWER VGA S-VIDEO VIDEO IN AUDIO PC AUDIO
RL IN OUT
TV ANT
VGA S-VIDEO VIDEO
IN OUT
AUDIO
L R
AUDIO
TV ANTDC POWER
18.1£ ¢
VGA S-VIDEO VIDEO IN
IN OUT
PC AUDIO
L R
AUDIO
TV ANTDC POWER
POWER VGA S-VIDEO VIDEO IN AUDIO PC AUDIO
RL IN OUT
TV ANT
18.1£ ¢
17£ ¢
15£ ¢
Connecting the VCR, DVD, TV or Other External Device
LCD MONITOR
USER'S MANUAL
To view television channels correctly, a signal must be received by the set from one of following
sources :
£ ª An outdoor aerial
£ ª An indoor aerial (not recommendable)
£ ª A cable television network
1. In the first three cases, connect the aerial or network input cable to the 75 ohm coaxial socket
on the bottom of the television.
2. Press the TV mode button on the remote controller.
(TV Function is optional with users.)
¥ ° . Parts Description
1. Connect video and audio cable according to the sharpe and color of the video/audio cable.
£ ª When an external device is in MONO, the audio connection cable can be connected to either
the left or the right and S.MODE should be set FM MONO.
2. For optimal visual image, use S-VIDEO connector instead of video (yellow) connector.